Ubiquiti US-8-5 Fully Managed Gigabit Switch 5Pk

Introduction

Thank you for purchasing the Ubiquiti Networks® UniFi® 8-Port PoE-Powered Gigabit Switch with PoE Passthrough. This Quick Start Guide is designed to guide you through the installation and also includes the warranty terms.

Network Topology Requirements

• A DHCP-enabled network for the UniFi Switch to obtain an IP address (connected devices will also obtain IP addresses after deployment)
• A UniFi Cloud Key or management station running the UniFi Controller software v5.3 (or newer), located either on-site and connected to the same Layer 2 network, or off-site in a cloud or NOC

Specifications

• Dimensions 148 x 99.5 x 30.7 mm (5.83 x 3.92 x 1.21")
• Weight 432 g (15.24 oz)
• Networking Interfaces (8) 10/100/1000 Mbps RJ45 Ports
• PoE In (Port 1)
• PoE Mode 1: 802.3af/at (Pins +1, 2; -3, 6)
• PoE Mode 2: Passive 48V (Pins +4, 5; -7, 8)
• PoE Out (Port 8)
• PoE Mode 1: 48V (Pins +1, 2; -3, 6)
• PoE Mode 2: Passive 48V (2-Pair Pins +4, 5; -7, 8)
• DC Input Mode: 48VDC (Pins +1, 2; -3, 6)
• Power Method (1) DC 48V, Max. 1.25A (1) PoE Input, 802.3af/at (Pins +1, 2; -3, 6)
• Power Supply External AC/DC Adapter: 48V, 0.5A
• Max. Power Consumption 12W (Excluding PoE Output)
• Max. Passive PoE Wattage PoE Mode 1: 12W @ 802.3at
• per Port  PoE Mode 2: 12W @ 48V PoE Mode 2: 12W @ 48V
• Passive PoE Voltage Range Depends on Power Source
• Line Rate 8 Gbps, Non-Blocking
• LEDs
• System Status
• RJ45 Data Ports PoE; Link/Speed/Activity
• ESD/EMP Protection ± 24kV Air, ± 24kV Contact
• Operating Temperature -5 to 45° C (23 to 113° F)
• Operating Humidity 5 to 95% Noncondensing
• Certifications CE, FCC, IC