Plasma Cloud’s response to high performance requirements. This tri-band (1x 2.4GHz & 2x 5GHz) 802.11ac WiFi AccessPoint offers maximum throughput by leveraging the full WiFi spectrum
Power over Ethernet (PoE)
Power over Ethernet (PoE) allows to supply a device with power and data over a single Ethernet cable connection. This reduces installation cost and effort for locations without available power lines. Furthermore, when connected to a Plasma Cloud PoE switch, PoE allows to centrally manage & monitor the power supply.
Ethernet Ports
The 2 provided Ethernet ports allow for maximum flexibility: one port can be used as wired uplink while the other port serves as LAN access for other wired devices. Each Ethernet port comes with a smart uplink detection to automatically determining whether a port should be uplink or provide LAN access.
Mounting Options
Regardless where to place the Access Points – on a wall or ceiling grid – the installer kit included with every Access Point facilitates the installation. Easily pluggable mounting options got you covered for every scenario.
Specifications:
-
Radio Chains / Streams 2.4 GHz : 2x2 / 5 GHz : 2x2 + 2x2
-
Antennas 2.4 GHz : 5.0 dBi / 5 GHz : 5.0 dBi
-
Data Rates 300 Mbps + 867 Mbps + 867 Mbps
-
2.4 GHz 2 stream, 802.11 b/g/n (max rate: 300 Mbps)
-
5 GHz 2 stream, 802.11 a/b/g/n/ac (max rate: 867 Mbps) Wave 2, MU-MIMO / 2 stream, 802.11 a/b/g/n/ac (max rate: 867 Mbps) Wave 2, MU-MIMO
-
Processor Qualcomm Dakota IPQ4019
-
Memory 256 MB DRAM DDR3
-
Physical Interface 2x 1000 Mbps Ethernet ports
-
PoE 802.3at
-
DC Jack 12V / 2A
-
Power Consumption Min : 11W
-
Max : 20W
-
Max Recommended Clients 75-150 per AP
-
Indoor/Outdoor Rating
-
recommended indoor device
-
Dimension (W x D x H) 200 x 200 x 45 mm
-
Weight 902 g
-
Operating Temperature 0°C ~ 40°C (32°F ~ 104°F)
-
Certifications CE, FCC, IC, RCM
Manufacturer | PLASMA CLOUD |
---|