Netonix WS-12-250-DC Switch 12 Gbps + 2 SFP Uplink Ports Port Managed PoE 250W

The Netonix® WISP Switch™ model WS-12-250-DC is designed specifically for the WISP industry with a rugged chassis and extended operating temperature range. It features a simple yet powerful user interface providing the software features WISPs need in a switch.

12 Port Manged POE Switch + 2 SFP Uplink Ports

Specifications:

• Manufactured and Assembled NorthAmerica

• Standard 19” rack mount /Desktop /Wall mount YES

• Dimensions 223mm x 181mm x 44mm

• Weight 2 kg

• Power Input 210-230 & 110-120 VAC

• Chassis Earth GroundLug YES

• Max. PowerConsumption 250 Watts

• Intelligent Forced Air Cooling With Fan RPM Monitoring YES

• SwitchCoreandPHYs Vitesse

• Processor MIPS 24K 416MHz

• SystemMemory 128 MB

• Flash Storage 16 MB

• Total Non-Blocking Line Rate 14Gbps

• Certifications CE, FCC, IC

• Operating Temperature -25 to 55°C (-13 to 131° F)

• Operating Humidity 5 to 95% Non-Condensing

• Console Port RS-232

• Ethernet Ports (12) 10/100/1000 Ethernet Ports

• (2)SFPPorts

• Passive POE ConfiguredPer Port via UI / CLI 24V 1A pins 4,5(+) 7,8(-)

• 48V 1A pins 4,5(+) 7,8(-)

• 24VH 2A pins 1,2,4,5(+) 3,6,7,8(-)

• 48VH 2A pins 1,2,4,5(+) 3,6,7,8(-)

• POEOutVoltageRange 50 VDC / 24 VDC

• PassivePOE CurrentSensorsPerPort YES

• ESD Rating 24 kV Air / 24 kV Contact

Monitor DC voltage and current into the switch from your batteries.

Monitors the DC power supply temperature with auto and programmable thermal shutdown.

Program the switch to shut down lower priority POE ports when batteries get low and to restore them when sufficient reserves return or when it detects charging has resumed from solar or wind.

If power gets too low it can be configured to shut down all POE ports and hibernate your remote site until it detects solar or wind charging has resumed and sufficient reserves are generated.

you can chose to run your batteries all the way down to 9V to keep the tower up or have it shut down in stages to preserve your energy.

Since we designed the power supply to have its own micro processor and to communicate to the switch itself we have full control over the power supply and all relative telemetry generated by sensors built into the power supply.

Designed to hook directly to battery bank not a power supply.

NOTE: Always use an inline fuse or breaker.

NOTE: 

- Optional rack mount kit sold seperatly

If you have a 48V-54V power supply you should use the WS-12-DC unit.

250 Watt SMART DC power supply accepts 9V to 72V DC variable input while providing uninterrupted 24V and 48V POE

- 250 Watt POE budget when input voltage above 12V

- 200 Watt POE budget when input voltage above 11V

- 150 Watt POE budget when input voltage below 10V

WARNING: These switches are not designed to operate on negative 48V site, using -48V DC will damage the switch as it does not have isolated input output power.

If you need negative DC input look at the WS-26-400-IDC.