Ubiquiti EP-S16 Intelligent WISP Control Point with FiberProtect™

The EdgePoint™ offers an innovative combination of robust routing performance, fiber backhaul capability, and the convenience of passive PoE support.

Ubiquiti Networks introduces the EdgePointTM, part of the EdgeMAX® platform. The  rst application-speci c designed WISP control point, the EdgePoint combines EdgeMAX routing features with  ber backhaul and versatile powering capabilities.

The EdgePoint is available in three models:

• EP-R6 Layer-3 router
• EP-R8 Layer-3 router
• EP-S16 Layer-2 switch with some layer-3 capabilities

Breakthrough in Tower Deployment

The EdgePoint features FiberProtect to signi cantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI), greatly improve data signal integrity, and consolidate the wired data backhaul to a single  ber cable run for long-distance connectivity.

All-in-One Design

A single, compact controller ef ciently eliminates clutter, expensive cabinets, extraneous installations, and excessive maintenance.

Robust Construction

The ruggedized case withstands outdoor conditions, including wind, rain, and snow. The included cable sleeve protects the cables and cable opening. If you prefer, you can swap it out for your own conduit.

Advanced Applications

For the EP-R6 and EP-R8, powerful routing features – such as load balancing and failover– provide redundancy and increased performance for outdoor wireless links.
For the EP-S16, layer-2 link aggregation provides similar redundancy and increased performance bene ts.

Versatile Power Options

Powered by 54VDC or by PoE, the EP-R8 and EP-S16 can support 54 or 24V passive PoE to power all Ubiquiti® products, including airFiber® and airMAX®.
Powered by 24VDC or by PoE, the EP-R6 can support 24V passive PoE to power most Ubiquiti products.

Hardware Overview

EP-R8

The EP-R8 features six RJ45 Ethernet ports and two combination RJ45/SFP Ethernet ports.

Bottom Panel

• Power Options
• 54VDC, 6A Terminal Block
• Dual PoE Input
• (1) Console Port
• Data Ports
• (6) RJ45 Ports
• (2) Combination RJ45/SFP Ports

Nine RJ45 ports support PoE:

• PoE Input
• (1) 54V, 1.5A (No Data)
• (1) 54V, 1.5A
• PoE Output
• (2) 54 or 24V, 1.4A Passive PoE Output Ports*
• (5) 24V, 0.7A Passive PoE Output Ports*

Cabling Protection

• Strain Relief for Fiber Optic Strands
• Cable Sleeve and Option for Conduit (Not Included)
• Cable Tie Slots (Cable Ties Not Included)

Back Panel

• Lanyard Loop for Ease of Installation
• Slot for PicoStation®M2HP (Not Included) to Allow for Wireless Management
• Pole-Mount Bracket (Wall-Mount Bracket Also Included)
• Ground Bonding Point

Specifications

• Dimensions 326.6 x 382.7 x 88.8 mm (12.86 x 15.07 x 3.50")

With Wall-Mount 326.6 x 382.7 x 105.5 mm (12.86 x 15.07 x 4.15")

• Weight 3.4 kg (7.50 lb)
With Wall-Mount e.8 kg (8.38 lb)
• Enclosure Characteristics Diecast Aluminum Alloy and Polycarbonate with UV Resistance
• Max. Power Consumption 40W (Excludes PoE Output)
• Power Input (1) DC Terminal Block or (2) RJ45 (PoE In and eth0) (Self-Correcting Polarity Protection on DC Terminal Block Only, Diode ORed Protection on All Power Inputs)
• Power Supply Min. 54V / 0.8A (Excludes PoE Output Power)
• VDC Input 54VDC, 6A
• Passive PoE Input (2) 54V / 1.5A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, eth0 and PoE In (PoE In is DC Only, No Data)
• Passive PoE Output (2) 54V or 24V / 1.4A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, eth1 to eth2 (5) 24V / 0.7A, 2-Pair (+4, 5; -7, 8) Passive PoE, eth3 to eth7
• Power Monitoring (1) DC Terminal Block, Input Power (2) RJ45, PoE In and eth0, Input Power
• Supported Voltage Range 56 to 42VDC
• Button Reset
• LEDs

System Power
eth0 Speed/Link/Activity
eth1 to eth7 Speed/Link/Activity, PoE
SFP Speed/Link/Activity

• Ports

Serial Console (1) RJ45 Serial Port
Port PoE (1) RJ45 Port
In Port (6) 10/100/1000 RJ45 Ports
Data Ports (2) 10/100/1000 RJ45/SFP Combination Ports

• Processor Dual-Core 600 MHz, MIPS64 with Hardware Acceleration for Packet Processing
• System Memory 2 GB DDR3-1600 RAM
• Code Storage 4 GB
• Certi cations CE, FCC, IC
• Pole/Wall Mount Yes
• Operating Temperature -40 to 65° C (-40 to 149° F)
• Operating Humidity 10 to 90% Noncondensing