Ubiquiti Networks introduces the EdgePointTM, part of the EdgeMAX® platform. The rst application-speci c designed WISP control point, the EdgePoint combines EdgeMAX routing features with ber backhaul and versatile powering capabilities.
The EdgePoint is available in three models:
• EP-R6 Layer-3 router
• EP-R8 Layer-3 router
• EP-S16 Layer-2 switch with some layer-3 capabilities
Breakthrough in Tower Deployment
The EdgePoint features FiberProtect to signi cantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI), greatly improve data signal integrity, and consolidate the wired data backhaul to a single ber cable run for long-distance connectivity.
All-in-One Design
A single, compact controller ef ciently eliminates clutter, expensive cabinets, extraneous installations, and excessive maintenance.
Robust Construction
The ruggedized case withstands outdoor conditions, including wind, rain, and snow. The included cable sleeve protects the cables and cable opening. If you prefer, you can swap it out for your own conduit.
Advanced Applications
For the EP-R6 and EP-R8, powerful routing features – such as load balancing and failover– provide redundancy and increased performance for outdoor wireless links.
For the EP-S16, layer-2 link aggregation provides similar redundancy and increased performance benets.
Versatile Power Options
Powered by 54VDC or by PoE, the EP-R8 and EP-S16 can support 54 or 24V passive PoE to power all Ubiquiti® products, including airFiber® and airMAX®.
Powered by 24VDC or by PoE, the EP-R6 can support 24V passive PoE to power most Ubiquiti products.
Hardware Overview
Three EdgePoint models offer a variety of hardware features for your application.
EP-R6
The EP-R6 features ve RJ45 Ethernet ports and one SFP Ethernet port.
Bottom Panel
• Power Options
• 24VDC, 3A Terminal Block
• PoE Input
• (5) 24V, 0.7A Passive PoE Output Ports*
• (1) SFP Port
Specifications
• Dimensions 188.6 x 177.1 x 49.8 mm (7.43 x 6.97 x 1.96")
• Weight 605 g (1.33 lb)
• Enclosure Characteristics Polycarbonate with UV Resistance
• Max. Power Consumption 7W (Excludes PoE Output)
• Power Input (1) DC Terminal Block or (1) RJ45 (eth0) (Self-Correcting Polarity Protection on DC Terminal Block Only, Diode ORed Protection on All Power Inputs)
• Power Supply Min. 24V / 0.3A (Excludes PoE Output Power)
• VDC Input 24V, 3A
• Passive PoE Input (1) 24V / 1.4A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, eth0 (Do NOT Con gure eth0 in PoE Output Mode if You Are Using a PoE Input Power Source.)
• Passive PoE Output (5) 24V / 0.7A, 2-Pair (+4, 5; -7, 8) Passive PoE, eth0 to eth4
• Power Monitoring (1) DC Terminal Block, Input Power (1) RJ45, eth0, Input Power
• Supported Voltage Range 26 to 16VDC
• Button Reset
• LEDs
System Power
eth0 to eth4 Speed/Link/Activity,
eth5/SFP PoE Speed/Link/Activity
• Ports Data Ports (5) 10/100/1000 RJ45 Ports (1) 1 Gbps SFP Port
• Processor Dual-Core 880 MHz, MIPS1004Kc
• System Memory 256 MB DDR3-1600 RAM
• Code Storage 256 MB NAND
• Certi cations CE, FCC, IC
• Pole Mount Yes
• Operating Temperature -40 to 65° C (-40 to 149° F)
• Operating Humidity 10 to 90% Noncondensing
Manufacturer | UBIQUITI |
---|